Researchers from Stanford University and Nvidia have teamed up to help develop VR glasses that look a lot more like regular spectacles. Okay, they are rather silly looking due to the ribbons extended from either eye, but they’re much, much flatter and compact than your usual goggle-like virtual reality headsets today.
“A major barrier to widespread adoption of VR technology, however, is the bulky form factor of existing VR displays and the discomfort associated with that,” the research paper published at Siggraph 2022 (opens in new tab) says.
These aptly named “Holographic Glasses” can deliver a full-colour 3D holographic image using optics that are only 2.5mm thick. Compared to the traditional way a VR headset works, in which a lens magnifies a smaller display some distance away from it, shrinking all the prerequisite parts down to such a small size is quite the spectacular step forward for VR.
The Holographic Glasses prototype uses pancake lenses, which is a concept that has been thrown around a couple of times in the past few years. These pancake lenses not only allow for a much smaller profile but reportedly they have a few other benefits, too: the resolution they can offer is said to be unlimited, meaning you can crank up the resolution for VR headsets, and they offer a much wider field of view at up to 200°.
Previous prototypes for pancaked VR glasses before this have managed to use them to reduce the gap between the lens and the screen to a tiny fraction of today’s VR headsets. However, they could only display 2D images. Not great for today’s immersive experiences.
The Stanford and Nvidia device hopes to build on those previous prototypes: delivering both 3D images and minimising the gap between lens and screen even further.
The research paper lists the glasses as such: “a coherent light source that is coupled into a pupil-replicating waveguide, which provides the illumination for a phase-only SLM that is mounted on the waveguide in front of the user's eye. This SLM creates a small image behind the device, which is magnified by a thin geometric phase (GP) lens.”
Just your usual stuff, then.
Granted, it’s a bit of a complex subject to get your head around from the paper alone, and I have no doubt the results are more impressive in person. However, the final result is a very small VR device that could be game-changing if made a reality outside of the lab. It also only weighs 60g, which is notably far lighter than even the Meta Quest 2 (opens in new tab) , which rolls in at 503g.
Though, it’s very much a promise of what’s to come more than an immediately shippable product today. There are some limitations: while there’s scope to have a much higher FOV than current generation VR headsets, this particular wearable prototype only offered an FOV of 22.8°. The benchtop prototype offered even less, at only 16.1°.
“[The FOV] is far smaller than commercially available VR/AR displays. However, the FOV was mainly limited by the size of the available SLM and the focal length of the GP lens, both of which could be improved with different components,” the researchers say.
Another limitation is the likely requirement for a very accurate measurement of the user’s pupil, which won’t be easy without a well-thought-out design. It would be possible to use an infrared gaze tracker to do this, the researchers note, but you’d need to be able to track the wearer’s pupil size constantly as they will adjust often to different light conditions while using the glasses.
You can read up on the whole project in the recently published research paper titled ” Holographic Glasses for Virtual Reality (opens in new tab) ” by Jonghyun Kim, Manu Gopakumar, Suyeon Choi, Yifan Peng, Ward Lopes, and Gordon Wetzstein.
But there’s a lot that’s very impressive about even these concept VR glasses. As the researchers state: “With an idea utilizing the user's pupil as a natural Fourier filter as well as the Pupil-HOGD algorithm considering the HDOs and the pupil size, a true glasses-form factor holographic VR was presented for the first time.”
Now just to wait and see which enterprising company puts it to good use in a shipping product.
- PSVR 2 Hands-On: Sony's Upcoming VR Headset Wowed Me
- Apple’s next event is all about the iPhone 14 so don’t expect to see its VR headset
- ByteDance's new VR headset is looking to go head-to-head with the Meta Quest 2 in Europe and Asia
- 15 best PC gaming headsets in India
- Apple Headset patent application describes letting you see invisible and hidden things
- The Half-Life 2 VR Mod is out on Steam, so you can finally, literally, pick up that can
- Apple is working on virtual assistants to help users navigate AR and VR
- Nreal Launches $379 Air AR Glasses, Adds Support for iOS and macOS
- This Week In XR: Breylon Raises $15 Million For Immersive Monitors, Taqtile $5 Million For Enterprise AR, Pico 4 VR Launch
- Stellaris is going where no 4X has gone before: a roguelite VR spin-off
- Jabs of bone marrow cells into spinal joints could soothe crippling back pain, research suggests
- Researchers squish cockroaches in order to design a robot
- Nreal Air AR glasses put your iPhone onto a 130-foot display
- Apple researching trackpad & gesture combo for controlling AR
- Apple AR research encompasses so much more than entertainment
- Deadly fungus can shape-shift its way deep into your brain: "shocked"
- Scientists discover new device to measure changing size of tumours below skin
- Shrinking the carbon footprint of cities
- Gym coach tells women 'stop trying to get rid of hip dips' as they're 'normal'
- An egg-cellent find: Two cannonball-sized DINOSAUR eggs dating back to the Cretaceous period are discovered in East China
Researchers find way to shrink a VR headset down to normal glasses size have 1001 words, post on www.pcgamer.com at August 9, 2022. This is cached page on Game Breaking News. If you want remove this page, please contact us.